Shows the current fuel settings for the given RPM. (100 RPM increments)
If the Hi-cam point is passed, the HI-CAM display will change from green to red.

Can adjust the hi-cam switchover point in 100 RPM increments, and can also adjust the RPM buzzer (warning tone).

The hi-cam switchover point has a range of 2000 RPM to 9000 RPM.
(* - The default setting is 4500 RPM)

The RPM warning tone can be adjusted from 0 to 9900 RPM. When the RPM passes the set number, a continuous beeping sound will sound.
(* - The default setting is 9900 RPM)

1. Switch to VTC Mode.
   
   
2. After a short hold on the MODE, you will hear a "beep" sound, and will see the MODE switch change to red. Your are now in "Setting Mode."
   
   
3. Use the UP and DOWN buttons to set the hi-cam switchover point -- keeping in mind that the number to the left is the RPM in 100 RPM incremetns.
   
   

4. After setting the hi-cam switchover point, a short hold on the MODE switch will change the SFC-VTEC to "Buzzer Mode" (the "H" on the right-hand side of the center display becomes a "b")
   
   
   Please apply the same instructions as the hi-cam switchover instructions.
   
   If there is no input for 5 seconds, the SFC-VTEC will automatically return to "Realtime Mode"
   
5. After a short hold on the MODE button, you will hear a electronic "beep," and your SFC-VTEC will return to "Realtime Mode."