Install Directions
1) Turn engine off, and disconnect the negative terminal from your
battery.
2) Remove any panels to access the ECU, and connect the wires
- Connect the BLACK wire to a secure ground source
- Using the electro-tap connectors, tap into the RED wire for power, and tap into the GREEN wire for the RPM signal.
- BROWN and
PURPLE lines are the sensor signal lines. Please use the
crimp-ons to cut the connection to the ECU and have it go through the
SFC unit.
3) Once the wires are connected, re-connect your battery's negative
terminal.
4) Once normal operation is confirmed, reinstall any loose panels and
install the SFC unit in a stable place.
WARNING: Please make sure you get a secure
ground source. This is your ECU we're talking about!
WARNING: Please use a proper crimping device
to ensure that a proper signal is maintained.
WARNING: Please install the SFC unit in a
cool place, away from direct sunlight or heat
vents.
©1998 Temple of VTEC
This Page is not affiliated with Honda
Motor Co. Japan, or any division of Honda Motor
Co.
![[home]](https://sohc.vtec.net/elem04/home.gif){kind=small}
![[rumors and news]](https://sohc.vtec.net/elem04/rumors.gif){kind=small}
![[model release matrix]](https://sohc.vtec.net/elem04/newmodelreleasematrix.gif){kind=small}
![[tov motorsports]](https://sohc.vtec.net/elem04/tov-m.gif){kind=small}
![[desktop calendar]](https://sohc.vtec.net/elem04/calendar.gif){kind=small}
![[exhaust notes]](https://sohc.vtec.net/elem04/exhaust.gif){kind=small}
![[tov forums]](https://sohc.vtec.net/elem04/forums.gif){kind=small}
![[links]](https://sohc.vtec.net/elem04/links.gif){kind=small}
![[search]](https://sohc.vtec.net/elem04/search.gif){kind=small}
![[sponsors]](https://sohc.vtec.net/elem04/sponsors.gif){kind=small}
![[garage]](https://sohc.vtec.net/elem04/garage.gif){kind=small}
![[login]](https://sohc.vtec.net/elem04/login.gif){kind=small}
